Burgundy Red - Self Adhesive 3D Tile

Our tiles use a specially formulated pressure-sensitive adhesive that leaves zero residue. When you're ready to remove them, simply warm the corner with a hair dryer for 20–30 seconds and peel slowly at a low angle. No holes, no marks, no damage — fully deposit-safe.

Clean your surface with a dry cloth to remove any dust or grease. Peel the backing film to expose the adhesive. Align your first tile from the centre and smooth outward with your hand to remove air bubbles. Trim edges with scissors if needed. No tools, no primer, no professional required — most walls take under an afternoon.

Yes — our tiles are 100% waterproof and resistant to splashes, steam, and humidity. They're perfect for kitchen backsplashes, bathroom vanity areas, and laundry rooms. Please note: they are not designed for direct water immersion, so we do not recommend them for shower floors or shower walls.

Warm a corner with a hair dryer on low heat for 20–30 seconds. Gently lift the edge and peel back slowly at a flat angle, parallel to the wall. The tile releases cleanly without pulling paint or leaving adhesive residue. No scraping or chemicals needed.

Each sheet covers 1 sq ft (30 × 30 cm). Measure your wall area in square feet, then add 10–15% extra for trimming around edges and outlets. For example, a standard kitchen backsplash of 10 sq ft would need around 11–12 sheets. If you're unsure, feel free to contact us — we're happy to help you calculate.

Our tiles adhere best to smooth, clean, non-porous surfaces including painted drywall, ceramic tile, glass, metal, and laminate. They are not recommended for rough or heavily textured surfaces, wallpaper, or freshly painted walls — please wait at least 4 weeks after painting before applying.